Sometimes you will notice that the bolt attached to the handle will come loose on your NaturCut mower. Below are the steps for what to do when this happens.
-first you’ll want to start off by taking the cotter pan off of the handle and then removing the handle from the bolt.
-Remove the hub cap.
-Take off the wheel clip (you will need a flat edged screw driver to do this).
-Remove the wheel.
-Use a phillips head screw driver and tighten the screw.
-Put on the wheel, wheel clip, and hub cap. (To put the hup cap on press the middle so it snaps back into place).
-Place handle back over the bold and put the cotter pin back on.
And voila, no more loose bolts!